WHAT THIS MOTOR IS This is a oil burner motor rated 1/8 horsepower, 1725 RPM, 115 volts, 1 phase. It is built with a 48N frame, totally enclosed non-ventilated, a rolled steel shell, 5.6 inches across the shell. It is reversible. It ships as a bare motor. HOW TO CONFIRM IT FITS Read the data plate on the motor you are removing, then confirm the horsepower reads 1/8, confirm the speed reads 1725 RPM, confirm the voltage reads 115, confirm the frame reads 48N, measure the shell and confirm it is 5.6 inches across, confirm the control expects 1 speed operation. WHAT IT REPLACES It goes in where Marathon O600 came out. The published electrical and mechanical values are matched to the part it replaces so the swap is a like-for-like fit rather than an approximation. Brand names and part numbers are used only to identify the equipment this motor is designed to fit. WHEN THIS IS THE WRONG MOTOR This is the wrong motor if the frame is not 48N, or if the supply sits outside 115, or if the duty calls for a speed other than 1725 RPM, or if the supply is not 1 phase. A motor that differs on any one of those values will not carry the same duty, and on this class of motor that shows up as a return rather than as a performance complaint. SPECIFICATIONS AND WHAT IS INCLUDED Horsepower 1/8. Speed 1725 RPM. Voltage 115. Phase 1. Amperage 2.6 amps. Speeds 1. Frame 48N. Enclosure Totally Enclosed Non-Ventilated. Shell diameter 5.6 inches. Frame material Rolled Steel. Rotation Reversible. Shipping weight 10.8 pounds. Shipped as motor only, Mounting hardware, brackets, bands, blower wheels and wiring harnesses are not part of this item. Coverage is 24 months against defects in materials and workmanship.