Create realistic miniature flooring with this 200-piece set of wood-look parquet planks for 1:12 scale dollhouses, roomboxes, dioramas, and architectural models. Each plank is built from a layered material: a 1.7 mm plywood base, a printed paper layer with wood texture, and a protective matte film surface. This construction gives the flooring a detailed wood-style appearance while keeping the pieces thin and easy to work with for miniature interiors. Each board measures 100 × 10 mm, with an overall thickness of about 2 mm. The plank format allows many layout options, including straight flooring rows, border details, custom room shapes, and decorative parquet-style patterns. The pieces can be cut with adjustable angle-cutting scissors, making it easier to fit corners, edges, and irregular floor areas. For installation, glue the planks to a clean, dry, and flat base using wood glue, PVA glue, craft glue, or double-sided adhesive tape. We recommend testing your chosen adhesive on a small area before completing the full project. Important care note: this product contains plywood, so it should be stored and used in a stable indoor environment. Recommended relative humidity is approximately 35–55%. If the room is too dry, too humid, or has strong humidity changes, the plywood layer may react, and the planks may bend slightly. In most cases, the plank can be gently flexed by hand in the opposite direction, then glued with additional pressure until the adhesive sets. This set is intended for adult miniature hobby projects and is not a toy. Recommended age: 14 years and up.