Search

Home / TRADOCK / Remote Controlled Vehicles & Parts
XT60 PDB with Dual BEC 5V/12V, Supports 3S-6S LiPo, 4-Layer 2oz Copper Power Distribution Board for FPV Drone RC (XT60 Soldering Required) in Saudi Arabia XT60 PDB with Dual BEC 5V/12V, Supports 3S-6S LiPo, 4-Layer 2oz Copper Power Distribution Board for FPV Drone RC (XT60 Soldering Required) in Saudi Arabia XT60 PDB with Dual BEC 5V/12V, Supports 3S-6S LiPo, 4-Layer 2oz Copper Power Distribution Board for FPV Drone RC (XT60 Soldering Required) in Saudi Arabia XT60 PDB with Dual BEC 5V/12V, Supports 3S-6S LiPo, 4-Layer 2oz Copper Power Distribution Board for FPV Drone RC (XT60 Soldering Required) in Saudi Arabia XT60 PDB with Dual BEC 5V/12V, Supports 3S-6S LiPo, 4-Layer 2oz Copper Power Distribution Board for FPV Drone RC (XT60 Soldering Required) in Saudi Arabia XT60 PDB with Dual BEC 5V/12V, Supports 3S-6S LiPo, 4-Layer 2oz Copper Power Distribution Board for FPV Drone RC (XT60 Soldering Required) in Saudi Arabia

XT60 PDB with Dual BEC 5V/12V, Supports 3S-6S LiPo, 4-Layer 2oz Copper Power Distribution Board for FPV Drone RC (XT60 Soldering Required)

SAR 79

Brand
TRADOCK
Weight
14 g
Availability
In stock
– 1 +

Special Features

  • Supports 3S-6S LiPo Input — compatible with 3S/4S/5S/6S battery setups for FPV/RC builds.
  • Dual BEC Outputs 5V/12V — 5V/3A switching BEC + 12V/0.5A ultra-low ripple linear BEC for video gear.
  • 4-Layer PCB + 2oz Copper — separates high-current paths from BEC circuits to reduce interference and improve current handling.
  • 6 Pairs ESC Power Pads — distributes power to up to 6 ESCs; ideal for X-frame/H-frame layouts.
  • XT60 Included (Soldering Required) — insulate the backside to prevent shorts and never reverse polarity.

Description

This XT60 power distribution board (PDB) is built for FPV and RC builds, distributing LiPo power to up to 6 ESCs while providing regulated 5V and 12V outputs for flight controllers, receivers, cameras, VTX, LEDs, and more. The 4-layer PCB separates high-current motor paths from BEC circuits to reduce ground noise, and 2oz copper supports high current capacity.
Package includes:
1 × Power Distribution Board (supports 3S–6S batteries)
1 × XT60 connector (user soldering/installation required)
Key Specifications:Battery input support: 3S–6S LiPo (3S/4S/5S/6S)
Copper: 2oz copper foil for high current handling
PCB: 4-layer design to reduce interference between motor current and BEC ground
ESC pads: 6 pairs of ESC power solder pads (fits X-frame / H-frame layouts)
Dual BEC outputs: 5V / 3A synchronous rectifier switching BEC
12V / 0.5A linear BEC (ultra-low ripple to help avoid image/video interference)

Current rating: 4×25A continuous, 4×30A peak (10s)
5V ripple: 40mV (Vin=16V, Vout=5V @ 2A load)
Size: 52 × 36 × 3 mm
Weight (incl. XT60): 11 g
Mounting holes: 30.5 mm spacing, 3 mm diameter
Frame fit: upper board width
Warnings / Notes:Observe correct polarity; reverse polarity is strictly prohibited.
Do not let the board backside contact carbon fiber plates to avoid short circuits; use insulation.
With a 4S battery, the 12V output can supply 500mA continuously (±2.5% regulation).
The 12V BEC can power one 12V camera + one 600mW VTX simultaneously.

Related Items


{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}