【COMPLETE HOLE PUNCH & 10 mm (3/8") GROMMET TOOL KIT】This press plier set is a 2-in-1 tool for hole punching (2.5/3/3.5/4/4.5/6/8/10/12 mm; 9 sizes) and 10 mm grommet installation. The kit includes 1 press plier tool, 3 upper punch dies, 9 interchangeable lower dies (2.5–12 mm) to change punching sizes, a pair of 10 mm grommet-setting dies, 100 sets of 10 mm grommets (eyelets + washers), and an accessory storage case. This leather tool and grommet kit offers excellent value for money.
【9 HOLE PUNCH SIZES, 2.5–12 MM】The vertical-press design and finished cutting edges help make clean holes, while the open bottom releases scraps. Built for leather, canvas, tarps, fabric and craft projects. 9 labeled lower dies cover 2.5–12 mm; swap the lower die by hand to change sizes. The 9 sizes cover a wide range of punching needs; for larger holes (6 mm and above), the hand-press design makes punching easier and more convenient.
【10 mm (3/8") GROMMET TOOL KIT】First, use the 10 mm punch die to create a hole. Remove the punch dies and install the dedicated upper and lower grommet dies. Insert the eyelet from the front and place the matching washer on the back. Align both pieces with the dies and squeeze the handles to set. This tool works as both an eyelet setter and a grommet press. Check the eyelet and washer orientation before pressing.
【DIE GAP SETTING & 3 UPPER PUNCH DIES INCLUDED】Before first use or after changing a die: with no material inserted and the handles fully closed, adjust the gap between the adjustment screw and stop block to 0.1–0.3 mm. Recheck the die gap after changing the lower die. This reduces impact during pressing and extends tool life. The upper punch die is replaceable; 3 upper punch dies are included in total—no separate purchase needed.
【ADJUSTABLE LOCKING EDGE GUIDE & EFFORT-SAVING HANDLES】For positioning, the sliding edge guide locks in place to maintain the same distance from the material edge, helping keep a row of holes evenly aligned. Long non-slip handles add leverage to reduce hand effort and allow one-hand operation while the other hand holds the material. Ideal for punching multiple holes in succession in leather, canvas, tarps and fabric.