【 5 PUNCHING SIZES 2.5–4.5MM – ONE LEATHER HOLE PUNCH PLIER, FIVE HOLE SIZES 】This belt hole puncher for leather punches 2.5/3/3.5/4/4.5mm round holes for belts, watch bands, bag straps and DIY leathercraft. Swap the size-marked lower die to change hole size; the universal upper punch stays in place—no realignment. Beveled lower dies shear cleanly; upper punch is long-life and replaceable. Actual hole sizes are metric; inch sizes are approximate.
【 6MM GROMMET SETTING KIT 】This set also lets you set 6mm grommets & eyelets: it includes 6mm setting upper/lower dies and 100 sets of 6mm grommets & eyelets (6mm≈1/4", the grommet inner diameter, not a punch size). The included punches cannot make the required 6mm hole—use a separate suitable hole-making tool first. Then swap in the setting dies, place the grommet/eyelet parts, and press the pliers to finish. The setting dies press and lock the grommet; they do not cut the hole.
【 COMPOUND LEVERAGE – PUNCHING & GROMMET SETTING 】One compound leverage mechanism handles both. For punching, force goes straight down as the beveled lower die cuts upward—holes stay round, edges clean, leather flat. For 6mm grommet setting, the same straight-down force presses the setting dies evenly. One-hand operation frees your other hand to steady the material. Non-slip grip supports effort-saving pressing; scraps fall out automatically. No extra cutting pad for punching.
【 TWO BUILT-IN ADJUSTMENTS – CLEARANCE & EDGE GUIDE 】The upper punch in leather punch plier is a flat pressing face. Clearance: set 0.1–0.3mm gap (≈ business card) to reduce impact on the upper punch and help extend its life; re-check after changing the lower die. Edge Guide: 8–22mm; slide, tighten, confirm by ruler or scrap test. Set once, holes stay at the same edge distance for belts, watch bands and repeat patterns. Effort-saving compound leverage and consistent spacing.
【 COMPLETE PUNCH SET & 6MM GROMMET SETTING KIT 】The set includes 1 press tool, 5 punching lower dies (2.5–4.5mm), 3 spare punching upper dies, 6mm grommet setting upper die and lower die, 100 sets 6mm grommets & eyelets, 1 clear case. The foam base in case keeps punches and dies organized and protected. Works on leather, PU, canvas and fabric; test on scrap first. User manual and video guide for quick setup. Easy for beginners and professional leathercraft. Handle lower dies with care.
【 IMPORTANT BEFORE YOU BUY – 6MM PUNCH NOT INCLUDED 】6mm refers to the grommet inner diameter, not a punching size. The included punching dies cannot make the 6mm hole required for the included grommets. A separate suitable hole-making tool is required before using the 6mm setting dies. Setting dies press and lock the grommet; they do not cut the hole. Not Included: 6mm Punching Die / 6mm Punch Tool.