Bovimix Cow Block Adhesive
A two component, room temperature curing, natural colored, oderless, thixotropic polyurethane adhesive specifically desighned for structural bonding of a wide range of materials, as well as thermosetting and thermoplastics materials, steel, aluminium, concrete, wood and glass. Processing: The strength and durability of bonded joints depend on proper pre-treatment of the surfaces to be bonded. At the very least, joint surfaces should be cleaned with a good degreasing agent in order to remove all traces of dust, dirt, oil and grease. Use of strong solvents is not recommended due to the risk of damage to the plastic surface. Pre-treatment of other surfaces can be made using acetone. Petrol or other solvents should never be used.
Where possible, carry out a mechanically abrasion to remove paint from the surfaces (where necessary) and to increase strength and resistance of the adhesion. Let dry the pre-treated area before applying the adhesive.