All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
1. 200 complete snap sets (800 pieces) in 9.5mm stainless steel, with a 5.9 inch hand press plier and a divided storage box. No sewing machine or needle needed: place the parts, squeeze the plier, and the snap is set in a few seconds.
2. The plier jaws are capped with soft rubber, so they grip without scratching the silver finish or marking thin fabric. New to snap pliers? Practice a few crimps on scrap fabric first; the motion takes two or three tries to get consistent.
3. These 9.5mm snaps hold knit jersey, cotton, muslin and light canvas up to about 1.5mm thick. They are small by design, so please check the size before ordering. For thick denim, leather or upholstery you need 12 to 15mm snaps instead.
4.Polished stainless steel resists rust and keeps its spring through repeated washing. Once set, the snaps hold tight through weekly machine wash and dry cycles without jamming or working loose.
5.In the box: 1 hand press plier, 200 snap sets sorted by part in a divided case, and an instruction card with diagrams. If anything is missing or damaged, message us through your order and we will refund you, no return needed.
Description
Add real metal snaps to fabric without a sewing machine. This kit gives you 200 complete sets of 9.5mm stainless steel snap buttons (800 pieces) and a hand press plier that sets each snap in a few seconds. Specs: - Snap size: 9.5mm cap diameter - 200 sets / 800 pieces: cap, socket, stud and post - Material: polished stainless steel, rust resistant - Plier: 5.9 inch hand press with rubber-capped jaws - Storage: divided case, parts sorted by type How to set a snap: 1. Mark the spot and push the post through the fabric. 2. Fit the cap over the post and place both in the plier jaw. 3. Squeeze firmly until you feel the crimp seat. A note on fabric: 9.5mm snaps are made for light to medium fabric such as knit jersey, cotton, muslin and light canvas up to about 1.5mm thick. They are small by design. For thick denim, leather or upholstery, please choose 12-15mm snaps, as this size will not grip those materials. Common questions: Q: The snap feels loose after setting. A: The crimp was not fully seated. Squeeze again with steady, firm pressure; the prongs should wrap the cap completely. Q: Can I wash garments with these snaps? A: Yes. Set snaps hold through weekly machine wash and dry cycles. Q: Are instructions included? A: Yes, a card with step-by-step diagrams comes in the box. If any set is missing or a part arrives damaged, send us a message through your order page and we will make it right with a refund, no return needed.