Product Description:
Product model: FS-GR3E
PWM channels: 3 channels
Frequency: 2.4G
System: AFHDS
Modulation: GFSK
Sensitivity: 1024
Antenna type: Single antenna (145mm / 5.7inch)
Power supply: 4.0-6.5V
Failsafe: yes (channel 2)
Bind port: yes (channel 3)
Power port: yes (VCC)
RSSI: Not supported
Data interface: PWM
Temperature range: 0℃ to +60℃
Humidity range: 20% to 95%
Online update: Not supported
Outline dimensions: 35 * 22 * 12mm
Package weight: 10g
Color: Black
Certification: CE, FCC
Suitable for: RC Car / boat
How to Bind?
Our products are well matched in the factory, you do not need to match by yourself.
But if your are going to match the receiver with other transmitter, or you need to change a new receiver or transmitter, please follow the following steps:
1. Install the battery to transmitter and shut it down.
2. Insert the Bind cable to the channel BIND port of the receiver.
3. Connect the receiver battery to VCC port of the receiver, on the same time the LED are flashing and this means the receiver are going to the matching status.
4. Press and hold the bind key of the transmitter and turn it on.
5. Observe the LED on the receiver, if find that the LED is not flash anymore and that means successful binding. (This process about 5s)
6. Disconnect the receiver battery.
7. Turn off then back on the transmitter.
8. Connect all the servos to the receiver and then connect its battery, then test.
9. If the tests fail, please repeat the action above.
Package List:
2PC FS-GR3E 3 channel receiver
2PC Bind plug
2PC Antenna tube