Product Overview
Upgraded manual glass butyl tape applicator kit specially designed for insulated double glazing processing. This all-in-one tool set adds exclusive copper foil smoothing scraper and free thread snips to solve common processing troubles including uneven copper foil and slow tape cutting. Built with solid stainless steel and equipped with 3 replaceable silicone press wheels, it fits most mainstream butyl tape sizes and is an essential helper for glaziers and glass processing workshops.
Core Product Advantages
1. Solid Stainless Steel Construction
Thickened stainless steel plate forms the main body, wear-resistant, anti-corrosion and easy to clean. Precision positioning metal brackets keep butyl tape aligned during feeding, effectively avoid tape deviation and material waste. The bench-top stable base will not slide during continuous mass production.
2. Three Size Interchangeable Silicone Press Rollers
Three standard silicone wheels (1/4", 3/16", 7/32") cover most common butyl tape widths for insulated glass. Soft silicone surface evenly presses tape tightly on glass edges without scratching glass, and squeezes out air bubbles to achieve wrinkle-free seamless bonding.
3. Exclusive Copper Foil Smoothing Scraper
Different from single-function applicators on the market, our full kit comes with a dedicated copper foil scraper. It quickly flattens wrinkled and uneven copper foil on glass edges, squeezes out residual air gaps, makes copper foil fully fit glass surface, and greatly boosts heat insulation and sealing performance of double glazing glass.
4. Free Thread Snips for Quick Tape Trimming
A pair of sharp mini thread snips is included in the package. After finishing edge wrapping, you can cut off redundant butyl tape in seconds without preparing extra cutting tools, simplify operation steps and save plenty of processing time.
5. Labor-Saving Manual Design, Wide Compatibility
No power supply required, fully manual portable design. Simple operation flow: install matched roller, load butyl tape, push glass forward against the roller to finish uniform edge wrapping in one pass. New operators can master the operation within 5 minutes. Widely applicable to insulated window glass, door glass, cabinet display glass, furniture decorative glass, suitable for small glass factories, glazing maintenance teams and DIY glass studios.
Step-by-Step Operation Guide
1. Install the butyl tape roll on the top spool of the machine
2. Select and install the silicone press wheel matching your tape width
3. Thread the butyl tape through metal guide brackets to the pressing area
4. Press the glass flat against the silicone roller and push forward steadily
5. Use the copper foil scraper to smooth copper foil, then cut excess tape with thread snips
Package Contents
1 x Stainless Steel Glass Butyl Tape Applicator Machine
3 x Silicone Press Wheels (1/4", 3/16", 7/32")
1 x Copper Foil Smoothing Scraper
1 x Thread Snips Cutter
Warm Tips
1. Clean up dust and stains on glass edges before taping to get better adhesion effect
2. Choose the corresponding press wheel according to the width of your butyl tape
3. Wipe and dry the machine after daily use to extend its service life