Neuroquill A2212 1400kv Brushless Outrunner Motor with Connector, 30A ESC BEC, Suitable for RC Glider Quadcopter Helicopter Aircraft Copter Multi-copter
Specification for A2212 1400kv Motor
KV: 1400
Max Efficiency: 80%
Max Efficiency Current: 4-10A (>75%)
Current Capacity: 12A/60s
No Load Current @ 10V: 0.5A
No. Of Cells: 2-3 Li-Poly
Motor Dimensions: Φ27.5 x 30mm
Shaft Diameter: Φ3.17mm
Specification for 30A ESC
Continuous / peak current: 30A
Number of battery sections: 2-3S LiPo
BEC output: linear mode: 5V, 2A
Power cord: red -16AWG-100mm*1; black -16AWG-100mm*1
Output line: 190mm
Power plug: T Plug
Output plug: 3.5Mm bananer connect (female)
Specification for SG90 9G servo parameters
Size: 21.5mm x 11.8mm x 22.7mm
No load speed: 0.12 sec / 60 deg (4.8 V)
Locked-rotor torque: 1.5-1.7kg/cm (4.8V-6V)
Operating temperature: -30+60 degrees Celsius
Dead zone setting: 5 microseconds
Working voltage: 4.8V-6V
How to Set Throttle Stroke Calibration
1. Connect the ESC with motor, another end connect with receiver.
2. Turn on the remote controller and push the throttle to the highest point
3. Plug the ESC into batteries
4. There has double click sound (the highest point of the throttle confirm)
5. After get the click sound take the throttle stick to the lowest point
6. Confirm the three click sound that means OK