WHERE IT GOES: Goes on Z-Trak Models 737 757 777 797, in the same spot as the part you are taking off. Reference number: TCU16026.
WHY IT MATTERS: Every drive on the machine leans on belts, pulleys and sprockets, and once one slips, the fan, deck or auger quits pulling its weight.
HOW IT'S MADE: Fabric-reinforced rubber with tension cords construction, shaped to the same profile as the part it replaces.
FITTING IT: Clean the shafts and mounting surfaces before fitting the new part, and replace any worn key, bolt or retaining hardware at the same time.
BEFORE CHECKOUT: Look for TCU16026 in your parts book or stamped on the old part. Set the worn hydro drive belt beside the listing photos and compare every hole, edge and connection.
Description
At a glance: Hydro Drive Belt. Listed for Z-Trak Models 737 757 777 797. Cross-reference: TCU16026. Material: fabric-reinforced rubber with tension cords. What it does: Keeping a spare on the shelf is low-cost insurance, since a snapped drive part always seems to quit in the middle of the job and never in the shed. Common wear signs: a squeal at start-up, a belt that rolls or flips off and cracks across the belt ribs. While you are at it, check the idler bearing and the tension spring.