Package Include:
1 x Receiver
1 x Transmitter (Contains 9V battery, can be used for 6-12 months)
1 x User manual
1 x 3M Antenna
1 x 18 month warranty
Receiver parameters
Working voltage: DC12~24V
Standby Current: 16mA for DC12V Power Supply, 10mA for DC24 Power Supply
Working temperature: -30 ℃~+80 ℃
Sensitivity: ≥ -112dBm
Operating frequency: 433MHz
Load current: ≤ 5A
Control mode Description
Toggle / Self-locking mode: Press -> On; Press again -> Off.
Momentary mode: Press and hold -> On; Release -> Off.
Latch / Interlocking mode: Press -> On; Press another button -> Off.
Setting different control modes:(Realize different functions by learning the number of button presses, Must enter learning mode)
We have set the receiver as Momentary control mode before delivery,. If you want to use other control modes, do as following operation Or tell us the mode you need after placing the order:
Momentary: (Press the learn button once to learn)
Toggle:(Press the learn button twice to learn)
Latched: ( Press the key 3 times after entering the code matching mode to match the code; Press the A BUTTON on the remote control, and the No.1 relay has successfully learned. Press B BUTTON and the relay corresponding to key 2 will learn successfully while relay 1 is disconnected,then press the receiver's code learning button again to exit the learning mode )
notice: This mode may be difficult, but if you are not good at electronics, we recommend that you purchase directly from us.)
1 channel Toggle+1 channel Momentary (Press the learn button 4 times to learn)
1.5-second delay momentary mode (press the learn key five times to learn)
3-second delay momentary mode (press the learn button six times to learn)
5-second delay momentary mode (press the learn button seven times to learn)
10-second delay momentary mode (press the learn button 8 times to lear)
Learn Code
Press the learn button 3 seconds until the LED light lights up once. The recipient now remains in the state of learning.and then you can press the appropriate button to learn according to your requirement.
Delete Code: Press and hold the learn button for about ten seconds until the light turns off.
If you need to change the working mode, you need to delete the previous working mode first.
Working Range:the maximum working distance can reach 200M in an open ground. The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this maximum working distance.