Auxruen Hot Wire Foam Cutter Kit, 2 Pens 2 and 4 Inch, Adjustable Power, Up to 932°F

Technical Specifications:

Product Name: Hot Wire Foam Cutter Kit

Quantity of Cutting Pens: 2 pieces

Pen Sizes: 5cm (2 inches) for fine detail work; 10cm (4 inches) for broader cuts

Power: Adjustable voltage controller

Input: AC100-240V

Heating Performance: Fast heating

Maximum Operating Temperature: 500°C (932°F)

Handle Material: Rubber, anti-slip and ergonomic

Pen Construction: Stainless steel

Power Cord Length: 2.5 meters

Compatible Materials: Foam boards, EPS blocks, EPP panels, KT boards, pearl cotton, and styrofoam

Recommended Applications: DIY craft projects, architectural model making, advertising signage, hobbyist carving, and creative design

Packaging Contents:

1 x 5cm (2-inch) Hot Wire Cutting Pen

1 x 10cm (4-inch) Hot Wire Cutting Pen

1 x Adjustable Voltage Controller with 2.5M Cord

1 x Metal Stand

1 x Marker pen

1 x User manual

Safety Precautions:

1. Allow cooling after 30 minutes of continuous use.

2. Always wait for the hot wire to cool before changing the pen.

3. Use gentle pressure to avoid damage to the cutting pen.

4. Work in a well-ventilated area; the hot pen can emit smoke and odor during use.

5. Keep your hands clear of the hot pen and allow it to cool before storing.

6. Please use the metal stand to prevent burns when working at high temperatures.

7. You should bend the hot wire only once, as repeated bending can cause the cutting pen to break.

8. Do not bend the hot wire at sharp angles! If bending is necessary, maintain a transition with a ≥R5mm radius, as repeated sharp bends can cause breakage.