Specification:
Item Type: Brushless ESC Electric Governor
Color: As Picture Shown
Weight: Approx.279g/9.8oz
Material: Aluminum Alloy + Plastic
Project Name: ESC
Item Model: 60A
Type: Brushless
Continuous Current: 60A
Burst Current: 320A
Resistance:
Battery: 2-4cells Lipo
BEC Output: 6V/5A (switch Mode)
Suitable Brushless Motor: >=9T
Project Name: 3650 RC Motor
Wattage: 850W
Maximum Voltage: Maximum Current: 100A
KV (RPM/volt): 2300KV
Maximum RPM: 60000 Maximum
Maximum Current: 100A
Number of Rotor Poles: 4
Connector: 4.0mm
Suitable for: 1/8 1/10 RC Car
How to Use:
1.Connect the BEC cable to the receiver.
2.Connect the motor to the ESC.
3.Turn on the transmitter.
4. Connect the battery pack to the ESC, and then turn on the ESC.
5. After the connection between the motor and the battery is completed, the motor will emit "beep" sound.
6. When throttle stick is in the neutral position, the electric motor will beeps again.
7. ESC is feasible.
packing list:
1 x Manual
1 x Motor
1 x ESC
Note:
1. Please allow 0‑1 inch error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.