1. [HIGH-SPEED INTERNET ACCESS] Enjoy fast download speeds of up to 150Mbps with 4G LTE technology.
2. [SIMPLE SETUP] Easy to connect and carry, supporting up to 10 users within a 50-meter range.
3. [LONG BATTERY LIFE] Utilizes a 3000mAh lithium battery for extended standby time.
4. [WIDE COMPATIBILITY] Works with various bands including 4G FDD LTE, TDD LTE, WCDMA, and GSM.
5. [PORTABLE DESIGN] Compact and sturdy ABS material for use indoors or outdoors.

Spec:
Item Type: Mobile WiFi Hotspot
Material: ABS
Suitable Regions: Europe, Asia (Mainly Europe)
WiFi: 802.11 b/g/n 2x2 up to 300Mbps
FDD LTE:B1/B3/ B7/B8/B20
TDD LTE:B40
WCDMA:2100/1800/850/900
GSM:850/900/1800/1900
Card Slot: SIM Card
Built in Battery: Li Ion 3000mAh (Ship with Inbuilt Battery)

How to Use:
Install to use
1. Insert the SIM card, then install the battery (tear off the insulating film).
2. Even if your SIM card is compatible with the product, it is not necessarily plug and play, you may need to disable the PIN code of the SIM card and modify the APN. enter the IP address of the router: 192.168.0.1, click Network, APN enable. Modify the access point.
3. Make sure the SIM card is activated, roaming service and virtual SIM card and Internet of Things SIM card are not supported.

Package List:
1 x Portable WIFI (Ship with Inbuilt Battery)
1 x Charging Cable
1 x User Manual

Note:
1. 150Mbps is the theoretical download speed, actual download speed depends on actual network conditions.2. Please check and confirm that the local operator's frequency band of your microSIM card matches the frequency band supported by this device before purchasing; otherwise, you will not be able to access the Internet.
3. Open the back cover of the device, take out the battery and tear off the battery insulation film.
4. Insert the microSIM card (Requirements for the microSIM card: the Internet access function has been activated; the size should conform to the PIN code should be in the off state.
5. If you still cannot access the Internet, you need to add APN information (connect to WIFI to enter the management backend for operation, for details, please refer to Points 3 and 5 of the product operation manual).
6. If the device functions abnormally, such as the screen flickering, please open the back cover of the device. There is a round hole called "RESET" on the bottom frame. Press and hold it for 3 to 5 seconds, and the device will automatically restart and return to factory Settings.