Search

Home / BNnYY / Car Electronics
OBD Dash Cam Power Cable USB C,Parking Mode Kit with Low Voltage Protection in Saudi Arabia

OBD Dash Cam Power Cable USB C,Parking Mode Kit with Low Voltage Protection 10FT

SAR 105

Brand
BNnYY
Category
Car Electronics
Weight
158 g
Size10ft
1 +

Special Features

  • 【Smart ACC Detection — Auto-Switches Driving & Parking Mode】 Precision ACC detection automatically identifies vehicle ignition status and switches between parking surveillance and auto power-off as needed. Smart power management for driving, temporary stops, and long-term parking — no manual operation, no missed recordings.
  • 【4-Level Low Voltage Protection — Prevents Battery Drain】 Supports 4 adjustable voltage cutoffs (11.6V/11.9V/12.5V/20min Timer). Built-in LED voltmeter monitors battery voltage in real time. Automatically cuts power when voltage drops too low — preventing over-discharge, extending battery life, and guaranteeing your vehicle starts every time
  • 【True 24/7 Parking Surveillance — Timelapse + Shock Wake-Up】 Activates low-power timelapse recording while parked and instantly switches to full HD recording when vibration is detected. Unlike cheap cables that drain your battery with constant full-power recording, our Type-C OBD charger cable enables smart energy-efficient surveillance — full protection, zero battery anxiety
  • 【Plug and Play — No Fuse Box, No ACC Wire Hunting】 Install in under 3 minutes. Simply plug OBD2 to USB-C power cable into OBD-II port — no fuse tapping, no wire splicing, no ACC wire hunting, no warranty voiding. Hidden wiring keeps cabin clean. Frees up cigarette lighter port
  • 【Upgraded Chipset + A8-B8 Adapter — Broad Vehicle Compatibility】 Built-in gyroscope chip with A5-B5 signal pin support plus free A8-B8 signal adapter for special models. Optimizes OBD power compatibility across most standard OBD2 vehicles (12V-24V). Works with dash cams, GPS, and radar detectors. One kit, universal fit
  • 【20-Minute Delay-Off — Never Miss Critical Short-Stop Moments】 Designed for traffic jams, drive-thru, and temporary stops — prevents dash cam power cycling during brief engine shutoffs. Smart timer ensures continuous recording through short stops, capturing every critical moment without interruption.
  • 【Complete Kit — Everything You Need】 What's in the Box: OBD2 Hardwire Kit (with LED Display), USB-C Cable (13.35ft), Ferrite Core, A8-B8 Adapter, Pry Tool, 3 Zip Ties,Manual. Built-in: Over-Current, Short-Circuit, Over-Heat, Reverse Polarity, Low-Voltage Protection & Built-in Fuse.

Description

Never guess your battery status again. Our OBD2 Dash Cam Hardwire Kit with USB-C & LED Display gives you real-time voltage visibility and 4-level adjustable low-voltage protection (11.6V/11.9V/12.5V/20min Timer)—so you always know exactly when power will cut off, and your vehicle always starts. True 24/7 parking surveillance with zero battery anxiety. Unlike cheap cables that drain your battery with full-power 24/7 recording, our Type-C OBD charger cable activates genuine low-power timelapse recording while parked and instantly switches to full HD recording when vibration or impact is detected. Smart ACC detection automatically identifies vehicle ignition status—switching between driving mode and parking surveillance without any manual operation. The 20-minute delay-off function prevents your dash cam from power cycling during traffic jams or quick stops, ensuring you never miss a critical moment. Install in under 3 minutes—no fuse box, no ACC wire hunting. Simply plug into your OBD-II port and connect to your dash cam. No wire cutting, no fuse tapping, no warranty voiding. Hidden wiring keeps your cabin clean and frees up your cigarette lighter port. The built-in gyroscope chip with A5-B5 signal pin support (plus free A8-B8 adapter for special models) ensures broad vehicle compatibility—works with most 12V-24V cars, SUVs, and trucks, and is compatible with dash cams, GPS, and radar detectors. Complete kit—everything you need in one box. Includes OBD2 Hardwire Kit (with LED Display), USB-C Cable (13.35ft), Ferrite Core Noise Filter, A8-B8 Signal Adapter, Pry Tool, 4 Zip Ties, and Bilingual Manual. Built-in fuse plus over-current, short-circuit, over-heat, and reverse polarity protection safeguards both your dash cam and vehicle. Ready to install out of the box. Backed by reliable support—contact us with any compatibility questions! Specifications: Input Voltage: 12V-24V DC Output: 5V/3A (USB-C) Cable Length: 13.35ft / 4.07M Cutoff Levels: 11.6V / 11.9V / 12.5V / 20min Timer Operating Temp: -20°C to 80°C Protect your vehicle with confidence—every drive, every park, every time.

Related Items


{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}