Magnets are fast. They're also the reason you keep looking down at your bars.
Every magnetic mount works the same way. Snap the camera on. Strong magnets pull it into place. A spring-loaded clip clicks shut. It feels solid on pavement. It feels solid at 20. Then you hit a stretch of washboard at speed, or case a jump, or clip a rock hidden in the dirt, and the thought creeps in: is the camera still there?
Standard bases bet your camera on magnet force and a tiny spring. That's the whole retention system. Under sustained vibration, repeated impact, or one unlucky snag on a backpack strap, that's not a retention system — that's a gamble.
We added a mechanical dead-lock. Snap the camera on, then flip the locking lever down. A steel clasp physically blocks the release channel. The camera cannot detach — not from vibration, not from impact, not because a branch swiped your bars. The magnet gets the camera on. The lock keeps it on. Flip the lever back up for instant quick-release. Speed when you want it. Security when you need it. Not a trade-off.
360° Rotation — Point It Where You Need It
Standard two-prong bases lock your shooting direction the moment you clip in. Forward. That's it. Want a different angle for the next stretch of road? Pull the base out of the clamp, loosen the center screw, rotate, re-tighten, re-clip. Five minutes of fiddling for a change that should take five seconds.
We put a rotation ring between the magnetic deck and the prongs. Stop, grip and twist to any horizontal direction, let go — it holds. Forward for the trail ahead. Rear-facing for the scenery behind. Side-angle for the canyon walls. Switch directions without removing the base from the clamp, without loosening a single screw. You're not rebuilding your setup every time you want a new angle. You're just turning a ring.
30 Grams. Built to Be Ignored.
CNC-machined from aerospace aluminum with an anodized corrosion-resistant finish. Stainless steel lock core. Stainless steel bearing surface inside the rotation ring — smooth after thousands of swivels, won't seize, won't develop play. Integrated silicone contact pad where the mount meets your camera.
Weighs 30 grams. Folds flat into a pocket, a tank bag, or the bottom of a backpack. You forget about it until the ride is over and the footage is clean.
Two Mounting Standards. One Base.
Foldable two-prong mount — clips into GoPro-standard action camera accessories. Chest mounts, head straps, bike clamps, selfie sticks, suction cups, backpack clips.
1/4"-20 threaded hole — screws onto any standard tripod, extension arm, or magic arm. Fold the prongs flat, thread it in, done.
No adapters. No stacked converters. No compromises.
Compatibility
Designed exclusively for:
- DJI Osmo Action 6
- DJI Osmo Nano
Not compatible with:
- DJI Action 5 Pro, Action 4, Action 3, Osmo 360
- DJI Osmo Pocket series
- Insta360 cameras
- GoPro cameras
What's Included
- 1 x Foldable 2-Prong Magnetic Quick Release Mount with Mechanical Lock and 360 Degree Rotation
- Clamps, tripods, and accessories shown in images sold separately
Thlevel — Built for the ride. Locked for life.