Compatible With Major Brands | Comes in Supplying Demand packaging
SB1s can only be used with copper to copper connections - not aluminum, steel or stainless steel tubing
As with any other fitting where it would be subject to condensation, the SB1 fittings need to be insulated after an install
Not reading/following the installation instructions carefully is the #1 cause of problems with the SB1 fittings
SB1s need to be replaced when retrofitting to a lower GWP - the compression set of the super neoprene o-rings may be compromised when transitioning from one to another
The fittings can be removed and reinstalled on the same spot of tubing if the tube is properly sanded and cleaned
No brazing, tools, or nitrogen purge needed for installation
SB1 fittings have a limited warranty policy that is available upon request after purchasing and providing information required for processing
Supplying Demand WK11X10007 3031237 Dehumidifier Water Bucket Float Device Replacement
SAR 120
Supplying Demand 241993001 240350802 2 Pack Refrigerator Rear Crisper Drawer Shelf Cover Support Stud Replacement
SAR 37
Supplying Demand WR60X10168 WR60X10028 Refrigerator Condenser Fan Motor Replacement
SAR 157
Supplying Demand WB24X10129 1086018 Range Hood Fan Switch Replacement with Hex Nut
SAR 84
