Voltmeter
Attention:
1. Rear view: Full-closed plastic shell, no high voltage parts of PCB can be touched by hand, safer and more reliable to use!!!
2. This voltmeter is designed using the principle of capacitor . Because the higher the frequency, the lower the impedance of the capacitor, so it is not suitable for high-frequency electronic speed regulation, non-commercial sine wave frequency, or other occasions with high-frequency components,or it will be burnt!!!
3.This meter shows the Average Value.
Technical parameters:
Test voltage: AC30-500V; Resolution:1V
Text precision:1%+/-2 digits
Display mode:0.56''/0.8'' LED with red /blue digits
Outline dimension:79×43×25 mm
Weight:About 60g
Mesuring speed:twice/S
Working humidity: 10 ~ 80% (no condensation)
Working pressure: 80 ~ 106kPa
Sun exposure: no direct exposure
Operating temperature: -10 ~ +50
Features:
Good product stability, high measurement accuracy, strong anti-interference ability.
Appearance adopts standard size, easy to install.
This voltmeter has only two wires, simple wiring and low cost.
Power supply:No need for additional power supply, two-wire system
==========
Hign-concerned Chemical : None
Model Number : YB5130
DIY Supplies : ELECTRICAL
Dimensions : 79*43*25mm
Operating Temperature : -10 ~ +50
Accuracy Class : 1%+/-2 digits
Power Supply : AC
Display Type : Digital Only
Test voltage : AC30-500V
Resolution : 1V
Display mode : 0.56''/0.8'' LED with red /blue digits
Weight : About 60g
Mesuring speed : twice/S
Working humidity : 10 ~ 80% (no condensation)
Working pressure : 80 ~ 106kPa
Sun exposure : no direct exposure