Specification: Inner Diameter: 12.7 mm / 1/2", Thread Size: 1/2" SAE, Thread Length: 11 mm / 0.43", Total Length: 94 mm / 3.7", Total Height: 85 mm / 3.35", Hole Center Distance: 41.3 mm / 1.63". (Tips: Manual measurement may have certain errors.)
Advantage: The flare gas valve uses high purity brass material as the raw material for the valve body, which is processed through precision forging technology and has excellent thermal conductivity and corrosion resistance. Combined with the dense structure brought by forging technology, the valve body has good strength and hardness. The valve core is made of modified nylon king special engineering plastic, which has excellent sealing performance, excellent wear resistance.
Instruction: Turning the handwheel clockwise closes the valve, while turning it counterclockwise opens the valve; The fully open or fully closed state only requires one and a half turns. During operation, the handwheel rotation angle can be adjusted according to the system flow requirements to control the valve opening.
Application: This flare valve is designed to be used in refrigeration systems, it acts as a shut-off point for the system, allows you to control the refrigerant or water flow easily, and saving time and effort during installation, troubleshooting, or routine maintenance tasks. Suitable for various commercial cold storage, industrial cold storage, low-temperature experimental chamber, freeze-drying equipment, etc.
Note: Please do not use under working conditions exceeding the rated working pressure of the product (4.5MPa) or unsuitable media.