Search

Search

Home / WAONIQ / Scales & Balances
1Sets 50kg Human Scale Load Cell, 4 Pcs Weighting Sensor and 1 Pcs HX711 Module, Half Bridge Strain Gauge Sensor in Saudi Arabia

1Sets 50kg Human Scale Load Cell, 4 Pcs Weighting Sensor and 1 Pcs HX711 Module, Half Bridge Strain Gauge Sensor

SAR 37
Brand
WAONIQ
Weight
82 g
– 1 +

Special Features

  • 24-Bit High-Accuracy A/D Converter: Equipped with the HX711 chip, a 24-bit high-accuracy analog-to-digital converter specifically designed for precision electronic scales.
  • Two Analog Channel Inputs: Features two analog channel inputs with an integrated 128x gain programmable amplifier, ensuring accurate signal amplification and processing.
  • Bridge Sensor Configuration: The input circuit can be configured to support bridge sensor modes (e.g., pressure, weighing), making it an ideal high-accuracy, low-cost sampling front-end module.
  • Accurate and Compact Sensor: The weighing sensor is highly accurate and sensitive, with a small volume for easy integration into various systems.
  • Versatile Usage Modes: The sensor is a half-bridge strain gauge with three usage modes, providing flexibility for different measurement applications.

Description

Specification:
Sensor Size:34*34mm/1.34*1.34in
Sensor Inner Construction: 1000ohm half-bridge strain gauge
Measuring Range: 50kg/100kg/200kg

Package List:
4 * Weighting Sensor
1 * HX711 Module

Users Manual:
When measuring, the outer side is correctly applied with external force. The strain beam part of the E-shaped sensor (that is, the beam arm with the white rubber in the middle of the strain gauge) and the outer side are to form a shearing force in the opposite direction, that is, the middle of the strain beam must be able to undergo bending changes under stress, and there should be no obstruction on the other side of the strain beam.

Inside the sensor is a set of half-bridge strain gauges, which can be used in the following three ways:
1. Use one sensor with external resistor to form a full bridge measurement. The range is one sensor's range: 50kg. Requires higher demands of outer resistor.
2. Use two sensors to form a full bridge measurement. The range is the sum of the ranges of the two sensors: 50kgx2=100kg.
3. Using four sensors to form a full bridge measurement, the range is the sum of the ranges of four sensors: 50kgx4=200kg

Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}