High Pressure ResistanceWorks Perfectly in the Pressure Environment of 7-215 psi; Flow Rate: 141CFM (4000L/min)High Degree of SafetyExcellent Metal Bowl w/ Visible Sight Glass in Every Stage Protect You and the System throughout the Entire Process.
Stage 1: Filter & RegulatorCompressed Air Water Trap Filter Equipped with 5 Micron Element which has Excellent Filtering Performance Much Longer Life and Reuse Feasibility Remove Most of Moisture and Particles in the Air Line; Pressure Regulator Accurately Adjust and Stabilize the Air Pressure.
Stage 2: Coalescing FilterThe Coalescing Filter is Equipped with a 0.01 Micron Element that can Remove 99.9% of Moisture, Smaller Particles and Oil, which Pass Through Stage 1 Combo. When the Filter Element needs to be Replaced, the Red Indicator will Pop Up.
Stage 3: Desiccant Air DryerThe Desiccant Air Dryer allows the Air to be Thoroughly Dried and Cleaned before it Enters your Pneumatic Tools. The Desiccant Beads need to be Added to the Metal Bowl. When it needs to be Replaced, the Beads will Change from Blue to Pink.
Accessories2 x 5 Micron Element(One of Them is Installed in the Product), 2 x 0.01 Micron Element (Same as Above), 4x 3.5oz (100g) Desiccant Beads Bag. 2 x 1/2" NPT Fittings, 1 x Thread Seal Tape.
==========
High-concerned chemical : None
Certification : None
Use : Commercial Manufacture
Color : As shown in the figure