Search

Home / Best Acrylics / Plastics
10 Pcs 1/8" Diameter x 12" Inch Long Color Yellow Translucent Acrylic Plexiglass Rods - .125 Dia - Approx 3mm - 10 Feet in Saudi Arabia 10 Pcs 1/8" Diameter x 12" Inch Long Color Yellow Translucent Acrylic Plexiglass Rods - .125 Dia - Approx 3mm - 10 Feet in Saudi Arabia 10 Pcs 1/8" Diameter x 12" Inch Long Color Yellow Translucent Acrylic Plexiglass Rods - .125 Dia - Approx 3mm - 10 Feet in Saudi Arabia 10 Pcs 1/8" Diameter x 12" Inch Long Color Yellow Translucent Acrylic Plexiglass Rods - .125 Dia - Approx 3mm - 10 Feet in Saudi Arabia 10 Pcs 1/8" Diameter x 12" Inch Long Color Yellow Translucent Acrylic Plexiglass Rods - .125 Dia - Approx 3mm - 10 Feet in Saudi Arabia 10 Pcs 1/8" Diameter x 12" Inch Long Color Yellow Translucent Acrylic Plexiglass Rods - .125 Dia - Approx 3mm - 10 Feet in Saudi Arabia 10 Pcs 1/8" Diameter x 12" Inch Long Color Yellow Translucent Acrylic Plexiglass Rods - .125 Dia - Approx 3mm - 10 Feet in Saudi Arabia

10 Pcs 1/8" Diameter x 12" Inch Long Color Yellow Translucent Acrylic Plexiglass Rods - .125 Dia - Approx 3mm - 10 Feet

SAR 71

Category
Plastics
Weight
114 g
1 +

Special Features

  • Translucent Yellow Acrylic
  • Weather & UV Resistant
  • High Strength Acrylic
  • Smooth Polished Surface
  • Aquarium Safe
  • Made in the U.S.A.

Description

You are buying 10 (Ten) New 1/8" Diameter by 12" Long Yellow Translucent Extruded Acrylic Rods. They are approx 3.175MM diameter. (Eighth inch Diameter x Twelve inch Long) These rods are Yellow Translucent Extruded Acrylic Rods. The color of the rods will vary depending on the back ground and light conditions due to being translucent. The last picture is a representation of the flexibility of the rods, as they are only 1/8" in diameter. Please keep this in mind if you are looking for something rigid. The color of the rod in this photo may or may not be the color you have ordered and will be receiving. They are not rigid but flexible. However, if the rods are put under pressure, they will snap. To assure that you get the finest quality, the protective sleeve is kept in place on the rods while being cut to protect the acrylic. All rods have saw cut edges on both ends. Saw cutting can cause microchips on the ends of the rod as seen in the pictures. Please allow a length tolerance of +/- 1/16" and there could be a small diameter variance as well on all pieces.

Related Items


{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}