HOW TO USE
1. Place the electronic constant temperature oil water bath on a stable platform. Secure the hose at the drain outlet, then fill the water bath box with clean water (hot water can be used to reduce heating time).
2. Power on the device; the red indicator light indicating OFF will illuminate. Adjust the temperature using the temperature control knob to your desired setting, and the water will begin to heat up while the ON indicator light turns on. The light will turn off once the set temperature is reached, indicating the water is maintaining a constant temperature.
3. Once the water bath has reached the constant temperature, place the container with the material into the water bath to begin heating while maintaining that temperature.
4. To optimize temperature constancy, seal the contact area between the constant temperature container and the bath using cardboard, ensuring the material within the container is lower than the level of the constant temperature water bath.
5. After use, extricate the container, switch off the power, and drain the water from the box. Remember to log the use of the instrument.

SPECIFICATIONS
Name: Constant Temperature Oil Water Bath
Model: Lift Type
Capacity Options: 2L, 3L, 5L
Power: 1.2KW, 1.5KW, 2KW
Temperature Control Range: Room Temperature to 250°C
Temperature Control Accuracy: ±1°C
Temperature Control Method: PID Intelligent Temperature Control
Temperature Uniformity: 80%
Inner Tank Dimensions: 240 x 140mm, 260 x 150mm, 280 x 170mm
Intended Use: Scientific Research, Educational Purposes

PACKAGING INCLUDES
1 x Constant Temperature Oil Water Bath
1 x Instruction Manual

SERVICE
For any inquiries or feedback regarding our products, please reach out to us via email.