The AUTOMAJOR 3-Pack Oil Drain Plug is a premium steel replacement designed as a direct replacement for VW/Audi/Porsche OEM part number N90813202. Each kit includes 3 oil drain plugs and aluminum crush washers — enough for years of oil change maintenance or backup replacements for multiple vehicles. This drain plug replaces VW/Audi OEM N90813202 (N-908-132-02) and cross-references with N90813201, N90813203, N91101401, and N90288901. Specifications: M14x1.5 thread pitch, 13mm hex head, steel construction with aluminum crush washers. If your vehicle uses any of these part numbers, this plug is the correct replacement. Each kit includes 3 oil drain plugs and 3 aluminum crush washers — enough for 3 complete oil change services or backup plugs for multiple vehicles. Aluminum crush washers compress under torque to fill microscopic surface imperfections between the plug flange and the oil pan, creating a tight, leak-free seal. Replace the washer at every oil change. A worn or missing oil drain plug is a roadside emergency waiting to happen. If the original plug is lost during an oil change, stripped from over-tightening, or cross-threaded into the oil pan, immediate replacement is needed before driving the vehicle again. Driving without a drain plug results in complete oil loss and catastrophic engine damage within minutes. Keep a spare plug in your toolbox for any DIY oil change. Important: this is the metal threaded drain plug (N90813202) for VW and Audi vehicles with traditional drain plugs. It is not for newer vehicles with quarter-turn plastic drain plugs (06L103801) used on some 2015+ TSI engines. If your VW or Audi has a plastic quick-lock drain plug, you need a different part. Verify which type of drain plug your vehicle uses before ordering. The 13mm hex head accepts standard automotive sockets — no special tools required. The steel construction provides long-term durability and consistent torque retention. The precision-machined M14x1.5 threads match factory dimensions exactly, ensuring proper engagement with the oil pan threads without cross-threading or binding. Installation: drain the engine oil completely, place a fresh aluminum washer on the new plug, thread the plug into the oil pan by hand (never start with a tool — always start by hand to avoid cross-threading), tighten with a 13mm socket to VW/Audi's specification of 25 Nm (18 ft-lbs). Do not overtighten — excessive torque can strip aluminum oil pan threads. This plug fits Volkswagen Jetta (1998-2024), Golf (1998-2024), GTI, Golf R, Passat (1998-2024), CC, EOS, Beetle (1998-2019), Tiguan (2009-2024), Atlas (2018-2024), Atlas Cross Sport, Arteon, Taos, Touareg (2004-2017), R32, and SportWagen; Audi A3 (2006-2024), A4 (1998-2024), A5 (2008-2024), A6 (1998-2024), A7, A8 (1997-2024), Q3, Q5 (2009-2024), Q7 (2007-2024), Q8, R8, S3, S4, S5, S6, S7, S8, SQ5, RS3, RS4, RS5, RS6, RS7, TT, TTS, TTRS, and Allroad; and Porsche Cayenne (2003-2024), Macan (2014-2024), and Panamera (select models). Always confirm your vehicle's OEM plug part number before ordering. Backed by AUTOMAJOR — trusted OEM-quality replacement parts for VW, Audi, and Porsche owners.