All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
DICHEN 75T FPGA: Xilinx Artix 7 FPGAs balance cost and performance, boasting features like high logic density, strong signal - processing, embedded memory, LVDS I/O, memory interfaces, and transceivers. These FPGAs offer excellent power - to - performance ratios, top - notch transceiver rates, powerful DSP, and fine AMS integration. The D DICHEN DMA card, leveraging the XC7A75T chip, is perfect for projects demanding high logic density and processing power.
PCILeech-friendly Compatibility: The D DICHEN model card supports 64-bit memory access and PCIe Transaction Layer Packet (TLP) access, and is fully compatible with PCILeech. PCILeech utilizes a PCIe board equipped with FPGA Direct Memory Access (DMA) capabilities to perform direct memory access operations, enabling both reading from and writing to the memory of the target system. It should be noted that only basic firmware is pre-installed on our card. We recommend that users flash the firmware themselves, allowing them to configure the card flexibly according to their specific requirements.
Efficient Heat Dissipation Assurance**: The 75T FPGA DMA card features an Artix 7 FPGA chip paired with a zinc - oxide - based thermal compound. Complemented by an aluminum alloy heat - dissipating enclosure, it achieves advanced dual - system heat dissipation, ensuring hardware performance and durability.
USB - C FTDI FT601 Connection The onboard FT601 SuperSpeed USB 3.0 integrated circuit (IC) is meticulously designed to offer exceptional speed and capacity in data transfer operations, boasting a maximum bandwidth of up to 5Gbps. When this high - performance IC is paired with the included USB 3.2 cable, it can significantly reduce data transfer bottlenecks, ensuring smoother and more efficient operation. Moreover, the system can maintain PCILeech DMA read and write speeds of up to 300 MB/s, guaranteeing reliable high - speed memory access for demanding applications.
CH347 USB-C JTAG: A CH347 JTAG is integrated onboard, allowing users to flash or update the card's firmware directly through the Update Port using a standard USB connection. This approach not only reduces the complexity of the setup but also saves time and effort by removing the need for external JTAG adapters or specialized hardware.
On/Off Switch: The 75T FPGA card is equipped with a convenient built-in on/off switch, designed to provide users with an efficient and hassle-free way to manage the device's power state. This feature eliminates the need to physically unplug or disconnect the card from your PC when it is not in use, offering a user-friendly experience. This design feature helps the user easily manage the card's power state, enhancing both convenience and the longevity of the hardware, while maintaining a stable connection to the system for when the card is needed again.
WS2811 IC Breakout Board, 2X WS2811 Chips per Board - no RGB LEDs - Serial Wombat PCB0027, 3Pack, Compatible with Arduino FastLED
SAR 53
ESP32-S3 1.46inch Round Touch Display Development Board, IPS Display Panel, 412×412 Pixel, Accelerometer and Gyroscope Sensor, Onboard Speaker and Microphone, ESP32 with Display, with Cover Glass
SAR 176
CM5 IO Board Metal Case for Official Compute Module 5 IO Board, Comes with Cooling Fan, 40PIN GPIO Adapter
SAR 126
ESP32-S3 2.8inch Touch Display Development Board, Onboard 2.8inch Touch IPS LCD 480×640, 32-bit LX7 Dual-Core Processor, Supports W-F-i & Blue-Too-th, ESP32 with Display
SAR 201
