【Compatible】The pex tubing clamps fit standard pipes with OD of 25 mm(1 inch) and an ID of 17.5 mm. The PEX clamps are compatible with PEX pipes, as well as 1 inch and 2025 PEX-AL-PEX pipes. (Please check whether the plastic pipe clamps size match)
【Premium and Durable】The 1" PEX pipe clamps are made of quality PVC material, sturdy and good flexibility, protects the tube well and keeps the clamp firmly in place. Compared with metal pipe clips clamps, our pipe clips will not rust and are very light
【Size & Package】Diameter: 0.98"/25mm; Opening Diameter: 0.69"/17.5mm; Bottom Diameter: 0.99"/25mm; Mounting Hole Diameter: 6mm/0.24inch (Suitable for screws above diameter 0.16inch/4.2mm). Quantity: 30 x PEX clamps, 30 x mounting screws and expansion tubes
【Easy Installation】The water pipe supports plastic clamps adopts a u-shaped snap-in design, which can be easily installed. Mark the position of the pipe clamp, and lock the fixed pipe clamp with screws. Then snap in the pipes into the U shaped slots
【Wide Application】The pex pipe clamps are suitable for installing fixed water pipes, cable pipes, gas pipes, and other fittings. Used in automotive, industry, boat, outdoor, garden, home decoration, RVs and any place where vibration may occur
SDTC Tech Microwave Oven Turntable Ring Glass Plate Tray Triple Arm Rotating Support with 16mm Roller Wheels for 10" Microwave Oven Glass Flat Turntable Plate (Arm Length 3.74" / 95 mm)
SAR 37
SDTC Tech 2-Set 4X 1.5V AA Battery Holder and I Type Battery Snap Connector Kit 6 Volt Thicken Plastic Battery Case Box
SAR 34
Camera Screw Kit, SDTC Tech 22 pcs D-Ring Quick Release Plate Mount Screw 1/4"-20 and 3/8"-16 Thread Tripod Screw Adapter Converter for DSLR Camera/Monopod/Ballhead/Light Stand etc.
SAR 53
SDTC Tech 3.7V 18650 Battery Holder 2-Slot Parallel or Series PCB SMT Battery Case with Copper Pin Contacts for Soldering DIY Electronic Circuit Project
SAR 37
