<b>Price For:</b> Each <b>Helix Angle</b>: 38 Degrees <b>Grade</b>: WP15PE <b>Neck Length</b>: Not Applicable <b>Stainless (M) Compatibility</b>: Yes <b>End Mill Material</b>: Carbide <b>Shank Type</b>: Weldon <b>Milling Diameter</b>: 3/4" <b>End Mill Cutting Type</b>: Center Cutting <b>End Mill Application</b>: Finishing <b>Number of Flutes</b>: 4 <b>Finish</b>: AlTiN <b>Shank Dia.</b>: 3/4" <b>Single End/Double End</b>: Single End
<b>Dimension Type</b>: Decimal inch <b>Item</b>: Corner Chamfer End Mill <b>Hardened (H) Compatibility</b>: Yes <b>Length of Cut</b>: 2-1/4" <b>Milling Dia.</b>: 3/4" <b>Cast Iron (K) Compatibility</b>: Yes <b>List Number</b>: 4V05 <b>Super Alloy (S) Compatibility</b>: Yes <b>Steel (P) Compatibility</b>: Yes <b>Cutting Direction</b>: Right Hand <b>Non Ferrous (N) Compatibility</b>: No <b>Overall Length</b>: 5" <b>End Mill Style</b>: Corner Chamfer <b>Chamfer Width</b>: 0.0200"
<b>Material - Machining</b>: Carbide <b>Measurement System</b>: Fractional Inch <b>Finish - Machining</b>: AlTiN <b>Material Grade - Machining</b>: WP15PE <b>Shank Type - Machining</b>: Weldon Flat <b>Drilling Tool Configuration</b>: Individual <b>Secondary Material Application ISO Code</b>: S <b>Primary Material Application ISO Code</b>: H, K, M, P, S <b>Secondary Material Application</b>: Super Alloy
<b>Primary Material Application</b>: Cast Iron, Hardened Steel, Nickel, Stainless Steel, Steel, Titanium <b>Country of Origin (subject to change)</b>: Israel
Description
'Corner Chamfer End Mill, Grade WP15PE, List Number 4V05, End Mill Style Corner Chamfer, End Mill Material Carbide, Dimension Type Decimal Inch, Milling Diameter 3/4 In., Single End'
Cor Rad End Mill,3/8",Carb,0.0300" rad
SAR 481
End Mill, TiAlN, 0.7500 in. Milling Dia.
SAR 1,920
End Mill, TiAlN, 0.6250 in. Milling Dia.
SAR 1,280
End Mill, AlTiN, 0.6250 in Millng Dia, 4V05
SAR 1,165
