FUNCTION: This solenoid valve is designed to installed indoors horizontally in a dry environment. If used outdoors, the coil part should be well protected from water
GOOD DURABILITY: The zinc alloy valve body would hold a press up to 0.8Mpa and liquid temperature from -5℃ to 100℃
SCOPE OF APPLICATION: Suitable for use with pipelines in water, air, gas and low viscosity non-corrosive fluid applications
SPECIFIC FEATURE: This is a normally close type electric solenoid valve, power on to open it and power off to close it
ATTENTION: Better for intermittent short time work, single continuous power on time is better to be less than 30 minutes
Frequency Standard Reference Module Crystal Oscillator Constant Temperature Board SMA Female Interface 10MHz
SAR 92
1/2in Float Ball Valve, Stainless Steel Automatic Water Level Control Valve Fill Feed Humidifier with PTFE Tape Elbow for Ponds, Livestock Water Trough Water Tank Sink Tower Pools
SAR 62
DIY Fashionable Eiffel Tower Shape Sewing Shears Stainless Steel Scissors for Embroidery Sewing Craft Art Work(Bronze)
SAR 53
Brass Valve Heavy Duty Male, ball valve handle replacement 1" male to 1"female gate valve brass and Female Thread Valve 1 Inch BSP DN25 Water Pipe Valve Replacement with Red Handle
SAR 124
