0.4MM P2S High Flow Hotend Kits, P2S Hotend Replaceable Nozzle Extruder Hot End Accessory, 2PCS 0.4mm High Flow Hardened Steel Nozzles For P2S 3D Printers, High-flow output-Saving Printing Time
Compatibility: The P2S extruder hotend replacement kit is compatible with bambu lab P2S FDM 3D printers. High-speed printing maintains detail precision. If you have any problems, we will provide solutions within 24 hours
Material: High-flow nozzles are manufactured from hardened steel, offering excellent wear resistance and heat resistance. All metal smooth insulation, composed of bimetallic copper and titanium alloy insulation sections, provides better heat dissipation effect
Quick Installation: The integrated hotend design enables quick replacement. Paired with our 0.6mm P2S high-flow hardened steel nozzle, it directly prints rigid materials like carbon fiber. With a maximum operating temperature of 300°C, it supports various engineering materials including PLA, ABS, PETG, PC, and nylon. The hotend features optimized internal flow channels with smooth, burr-free walls for smoother material flow and reduced risk of clogging
High Flow Rate: The larger your model, the more time you save. The high-flow output of the hot end and the optimized melt zone of the high-flow nozzle significantly increase volumetric speed, reducing print times for large models by over 30%. This makes it particularly suitable for engineering parts with high infill density. Even at high print speeds of 600mm/s, it maintains stable and continuous material extrusion
Warm Note: After installing this hotend printhead kit, recalibrating the heated bed is recommended. The hot end has been pre-installed with a 0.6mm hardened steel nozzle. Always ensure the hotend has cooled down before replacement to prevent burns
You Will Receive: 1 set of P2S HF hot-end quenched steel nozzle assembly kit, including two HF 0.6mm nozzles, a needle set for clearing nozzles, a ten-compartment parts box, and various tools. The image shows the actual contents shipped
Stainless Steel Self Tapping Screws (280pcs) #8×3/4" for 410 Sheet Metal Screws High-Strength Quick Tapping Screws kit with Titanium Twist Drill, S2 Screwdriver Drill Bit, Strong Parts Box.
SAR 84
99.9% Copper Tube 1/4" OD x 3/16" ID 10 Ft, Tube Wall: 1/32", Refrigeration Seamless Round T2 Pure Copper Tubes, Soft Coil Copper Tubing, Used In Refrigerators, Air conditioners, DIY project...
SAR 131
-6%
XIFOWE Vintage Bike Mirror Metal bicycle mirrors for handlebars Rearview Mirror Cruiser Bike Mirror Electric Bike Mirror Side Mirror Galvanized Steel Frame for The Retro Bike Parts
SAR 79
Hotend Kit 3D Printer Extruders with Standby Nozzles Compatible with Bambu Lab X1, X1-C X1 Carbon, 5 PCS Hardened Steel Nozzles (0.2, 0.4, 0.6, 0.8,1.0mm) with DIY Tools and A Parts Box...
SAR 63
