Dual-Protocol Fast Charging: USB-C + USB-A for All Your Devices.Charge USB-C smartphones, navigation devices, action cameras, and more—simultaneously at full speed. Supports PD 3.0, PPS, QC 3.0, AFC, and FCP—delivering up to 30W total output. Our combo port ensures every device gets the fastest charge possible.
Extra-Long 61-Inch Cable: No More Tension or Short Wires. With a 61-inch (5.1 ft) IP66-rated waterproof cable, you get ample length to route from battery to handlebar, mirror, or fairing—even on large touring bikes.Our heavy-duty cable stays flexible in cold weather and resists abrasion on rough rides.
All-Weather Protection: Built to survive rain, dust, mud, and high-pressure washes. The IP66-rated housing seals out water far better than basic rubber caps. Plus, an integrated 5A inline fuse (not 10A) provides precise over-current protection for sensitive electronics—keeping your phone and bike battery safe.
Real-Time Battery Monitoring and Smart Power Control: The bright LED voltmeter shows real-time system voltage (10–24V range)—ideal for older bikes or ATVs that run below 12V. The physical ON/OFF switch cuts all power when parked, preventing parasitic drain. Turn it off, and the display goes dark; turn it on, and you're ready to ride.
Two Easy Mounting Options – Handlebar or Mirror: Fits 0.75–1.3" handlebars or any mirror stem with a 10mm mounting hole. No drilling, no wiring—just secure, vibration-resistant installation in minutes. Works with most motorcycles, ATVs, and UTVs.
Important Compatibility Note: This charger is designed for 12V–24V vehicle electrical systems (input range: DC 10–24V), typical of motorcycles, ATVs, and UTVs. It is NOT compatible with electric motorcycles or e-bikes that use 36V–72V battery systems. To use on high-voltage vehicles, a DC-DC step-down converter must be installed to reduce voltage to within the 10–24V range. If you are unsure, consult a qualified technician.