SKF self-aligning clutch release bearings are designed to control certain clutch conditions associated with the misalignment of driveline components. Evaluate the following problems that misalignment or off-centered wear of the conventional clutch release bearing can cause compared with the benefits of an SKF self-aligning clutch release bearing:
SKF is the world leader in the design, development and manufacture of high performance rolling bearings, plain bearings, bearing units and housings.
Based on a modular design approach, SKF's clutch release bearing units comprise a precision ground sheet metal bearing unit and a polymer/steel sleeve or carrier . This design can be applied to push or pull clutch actuation with lever or concentric, hydraulic actuation . SKF has multiple designs available with inner or outer ring rotation for a variety of applications including motorsport and Formula 8
Clutch release bearings from SKF are based on the design of an angular contact ball bearing . These bearings are made of stamped steel inner and outer rings with precision ground raceways, a polymer cage and either seals or shields and are pregreased at the factory with a high quality lubricant
A clutch release bearing unit is used to engage and disengage the clutch via the diaphragm spring and pressure plate . Included in this compact design are provisions to guide the fork or piston radially
-34%
SKF Seal 15925A Auto Trans Output Shaft Left For Mazda 3 6 CX-5 CX-9
SAR 49
-7%
Seal
SAR 93
SKF U-Joint UJ377 For Dodge Jeep Ford Chevrolet GMC
SAR 108
SKF HB88540 Driveshaft Center Support Bearing 1.5" Inner Diameter for Chevrolet Chevy GMC Silverado Sierra 1500 Avalanche Suburban Trucks (1.575" ID)
SAR 354
