Function: This fuel injector drift tool kit is used to remove and install injector seal assembly on fuel rail, making it easier to reseal the fuel rail and replace the injectors. Note: Doesn't have the injector pulled needed to remove from engine. Also doesn't have the installer tool for the O rings on the injectors
Applicable Engine: Compatible with Mercedes-Benz M133, M139, M176, M177, M178, M254, M260, M264, M270, M274, M276 and M278 Engine
OEM Equivalent Part Number: 278 589 01 15 03. As precise as the OEM, and perfectly matched to the corresponding model, andand durable enough to extend the service life
Tips for Use: When removing the rail seals, use a pair of sharp-nosed pliers to remove the snap ring, then use this black sealing tool to remove the metal support piece, the open plastic support ring, the seal and the white support ring; when installing, insert the open plastic support ring, the seal and the white support ring into the black sealing tool, and then into another socket tool, then insert it into the rail to press it in, and then manually place the metal support piece into the rail in place. Finally, the retaining ring is inserted into the spring compression tool, which is then inserted into the rail and pressed in
Harmonic Balancer Damper Pulley Remove Extractor Kit Compatible with Ford, GM, Chrysler, Cadillac, Chevy Trucks, Mitsubishi, Upgraded Version 3 Jaw Puller
SAR 172
DPTOOL Clutch Alignment Tool Kit 17pc Universal Flywheel Pilot Hole and Clutch Drive Plate Aligning Tool (not fit Van Truck SUV)
SAR 135
DPTOOL Water Pump Sprocket Retainer Holding Tool Compatible with GM Ecotec 2.2 2.4 Replacement for Chevrolet Oldsmobile Pontiac Saab Saturn Platforms Cobalt
SAR 73
-5%
Oil Drain Plug No Leak 06L103801 6 Pack with Oil Drain Plug Removal Tool Compatible with Volkswagen 1.8L 2.0L Petrol Replacement for Audi Golf Passat
SAR 58
