Specification:
Product Name: Limit Switch
Model: AZ-7310 (TZ-7310)
Actuator Type: Push Plunger Type
Rated Voltage:
AC-15: 250V 5A
DC-13: 220V 0.3A
Contact Configuration: 1NC+1NO
Body Size: 54 x 42 x 21mm (L*W*T)
Mounting Hole Size: 4.2mm (D)
Mounting Hole Distance: 25.4mm

The plunger operated by hydraulic pressure or air cylinder power detects positions highly accurately.
The plunger must be installed according to the movement of the dog so that an incorrect load will not be imposed on the plunger.

Operating Characteristics:
OF max: 600g
RF min: 100g
PT max: 2.0mm
OT min: 6.0mm
MD max: 0.8mm
OP: 21.8+/-1.2mm

Description:
-High precision and long life, suitable for applications demanding higher mechanical strength, dust proof, and drip-proof properties than those on basic switches.
-Screw silver contact, outer shell covered with plastics.
-Sealed with gasket diaphragm to provide high sealing property without use of any adhesive or pin.
-This Limit Switch can be widely used in various mechanical to monitor the position of moving parts of machines and control circuit and auxiliary circuit for terminal limit protection.
-Excessive dog angle, operating speed, or overtravel (OT) may damage the actuator, and check that OT has a sufficient margin.