Universal Compatibility
This 3M adhesive dashboard pad is suitable for all phone suction cup holders and GPS mounting bases with a diameter of less than 80mm.
Dashboard Pad Mounting Instructions
1. Choose the location you would like to apply the disk and clean the dashboard .Remove surface oil stains or dust. And ensure complete drying
2. Remove the paper cover from the dashboard pad.
3. Before installing the suction cup bracket, allow the base pad to cure for 5 hours. It is best to let it cure for 24 hours.
4.Place the suction cup of the base (purchased separately) firmly in the center of the mounting pad, and then press the fixing rod
Note:
* Do not place the mount in or near an air bag deployment zone or where it will obstruct view of the road or hinder vehicle operation. Please mount it on a flat surface.
** Each pad is one-time use only. Once removed, it can not be reapplied.