Inspection and maintenance methods:
1. How to disassemble the automatic drain:Screw half a circle counterclockwise and pull up gently, you can clean the internal impurities and oil to prevent clogging.
2. No drainage and air leakage check:Firstly check whether there are too much impurities and oil inside, blocking the sealing rubber, which can be unscrewed to clean the dirt inside the cup. Secondly, check whether the stainless steel ball is broken into the water, resulting in no automatic drainage.
3. Pre-filtration needs to be manually discharged to avoid clogging without drainage.
Specification:
Item Type: Air Compressor Drain Valve
Water Inlet: G1/2'', that is, DN15
Drain Outlet: G1/2''
Water Outlet: 10mm
Pressure: 0-16bar
Maximum Operating Temperature: 80℃
Maximum Displacement: 200L/H
Package List:
1 x Air Compressor Drain Valve
1 x Pre-Filter Valve
1 x Pipe Connecting Fitting
1 x Brass Ball Valve
2 x PC10-04 Connect Fittings and a 10mm hose
1 x PL10-2 Connect Fittings
1 x Thread Seal Tape
1 x Rotatable Drain Outlet