Flat Torx Head Machine Screws: The package contains 20Pcs x Flat Countersunk Torx Anti Theft Machine Screws, Drive System: T10, Head Diameter: 5.5mm/0.22 inch, Pitch: 0.5mm/0.02 inch, Thread Size: M3x8mm/M3x0.31 inch(D*L).
Material: Flat head Torx drive screw is made of 10.9 grade carbon steel, black oxidized, with high hardness, good corrosion resistance, firmness, wear resistance, and low-temperature resistance.
Design: The screw head adopts a countersunk head and Torx drive design, which makes it very suitable for fastening applications in narrow areas. It can provide better torque and clamping force, wider bearing surface, and high tensile strength.
Easy to Use: Pre-drill with a suitable drill bit, put the internal torx countersunk screw into the hole, and tighten it with a Torx wrench or screwdriver. The tightening force needs to be adjusted during installation to avoid over-tightening or under-tightening, resulting in loosening or damage.
Application: Torx anti theft machine screws are widely used in industries that require fastenings, such as home hardware, machine tools, electrical products, mechanical equipment, ship,s, and DIY projects, and are suitable for professionals, repairmen,n and DIY enthusiasts.
uxcell 250Pcs 1/8" x 1/2" 304 Stainless Steel Dome-Head Blind Rivets, Open-End Type Blind Rivets for DIY, Sheet Metal, Automotive Repairs, Furniture, Boat, and Duct Work (Silver)
SAR 93
uxcell 5Pcs M8x22mm Jack Nuts, 304 Stainless Steel Threaded Insert Petal Nuts, Multi-Grip Expansion Rivet Nut Fasteners for Hollow Wall Iron Skin Line Use in Thin Soft Wall, Silver
SAR 34
uxcell 5Pcs 2-1/16" Internal Retaining Ring Circlip, 65 Mn Spring Steel Internal Circlip Snap Rings C-Clips for Grooved Shafts Studs, Black
SAR 41
uxcell 10Pcs 1-1/8" Internal Retaining Ring Circlip, 65 Mn Spring Steel Internal Circlip Snap Rings C-Clips for Grooved Shaft Studs, Black
SAR 38
