Search

Search

Home / U.S. Solid / Fittings
U.S. Solid 3/4" Brass Electric Solenoid Valve Underwater 110V AC Normally Closed VITON IP67 Air Water Oil Fuel in Saudi Arabia U.S. Solid 3/4" Brass Electric Solenoid Valve Underwater 110V AC Normally Closed VITON IP67 Air Water Oil Fuel in Saudi Arabia U.S. Solid 3/4" Brass Electric Solenoid Valve Underwater 110V AC Normally Closed VITON IP67 Air Water Oil Fuel in Saudi Arabia U.S. Solid 3/4" Brass Electric Solenoid Valve Underwater 110V AC Normally Closed VITON IP67 Air Water Oil Fuel in Saudi Arabia U.S. Solid 3/4" Brass Electric Solenoid Valve Underwater 110V AC Normally Closed VITON IP67 Air Water Oil Fuel in Saudi Arabia U.S. Solid 3/4" Brass Electric Solenoid Valve Underwater 110V AC Normally Closed VITON IP67 Air Water Oil Fuel in Saudi Arabia U.S. Solid 3/4" Brass Electric Solenoid Valve Underwater 110V AC Normally Closed VITON IP67 Air Water Oil Fuel in Saudi Arabia U.S. Solid 3/4" Brass Electric Solenoid Valve Underwater 110V AC Normally Closed VITON IP67 Air Water Oil Fuel in Saudi Arabia

1 Inch

SAR 283
Brand
U.S. Solid
Category
Fittings
Size1 inch
– 1 +

Special Features

  • 3/4" NPT (USA National Pipe Thread)- Commonly used standard pipe thread in U.S..
  • SOLID BRASS- This valve's body is made of solid brass (very corrosion resistant material).
  • UNIDIRECTIONAL- The arrow indicates the flow direction (horizontal mounting please).
  • DIRECT ACTING and NORMALLY CLOSED- The solenoid's magnetic field with directly moves the plunger and close the orifice for any fluid or gas flow. Only opens while energized.
  • VITON GASKET- Viton is a space age material that is very chemically inert. As such, it is commonly used with gasoline, kerosine and other organic solvents. Some companies sell solenoid valves with NBR gasket and advertise gasoline use. DO NOT USE NBR gasket for gasoline (it will corrode the gasket and can cause serious gasoline leak and accident or fire). If you intend on using a valve for gasoline, use only VITON gasket.

Description

U.S. Solid normally closed (N/C) electric solenoid valve is constructed with a durable brass body, 3/4" female threaded (NPT) connections, and strong VITON gasket.
The underwater solenoid valve is specially designed for diving work. The coil is sealed with epoxide resin, which has better waterproof performance than the ordinary solenoid valve. It is especially suitable for the water control of various fountains.
Brand: U.S. Solid
Model: USS-NSV00007
Size: 3/4"
Flow Aperture: 20 mm
Body Material: Brass
Gasket / Diaphragm / Seal: VITON
Rated voltage: AC 110 V, ±10%
Current: 0.236 A
Power rating: 26 VA
Operation Type: Direct Lift Valve
Operation Mode: Normally Closed
Level of protection: IP67
Operational pressure range: 0 to 116 PSI / 0-0.8 MPa (for Air, Water); 0 to 72 PSI / 0-0.5 MPa (for Oil)
Medium temperature range:-10℃ - 120℃ (-14℉ - 248℉)
Ambient temperature: -10℃- 50℃
Flow capacity: 7.6 gallons per minute (GPM) of water at 60oF with a pressure drop of 1 PSI
Flow value: 7.6 Cv
Length of cable: 1 m
Suitable Media: Air, water, oil, natural gas, diesel fuel, kerosene etc. Can not be used in strong acid, strong base, waste water, industrial gas and other media containing many impurities.
OVERHEATING WARNING:While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 80℃. It is fully complied with national standard: JB/T7352-2010. Energized continuously for no more than 24h at a time is recommended.
CA PROP65 WARNING - This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. They are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}