[Efficient Heat Transfer]Fills gaps and transfers heat from components to heat sinks with 1.5W/mk conductivity.
[Easy Application]Built-in adhesive for simple installation without additional thermal paste required.
[Precise Engineering]Manufactured with 0.01mm thickness tolerance and 4.5KV breakdown voltage for reliable performance.
[Superior Temperature Resistance]Withstands -58°F to 392°F ideal for high-power electronics applications.
[Versatile Use] for CPUs, GPUs, LED power supply, and other electronics requiring effective thermal management.

Item Type:Thermal Conductive Pad
Size:100 x 100 x 5mm / 3.94 x 3.94 x 0.2in
Color:Blue
Thickness Tolerance:0.2+-0.01
Continuous Using Temperature:-50~200℃
Conductivity Coefficient:1.5W/m-k
mass resistivity:10^12
Breakdown voltage:4.5KV
Hardness:30±5 Shore A
proportion:2.05
tensile strength:15 kg/cm㎡
Extension:48%
Mystical/Fantasy Retardant Grade:90V-0-1
Users Manual:
1.Clean the surface, it will be glued or cleaned by the surface of the object to remove dust and oil.
2.Tear protective film
The left hand picks up the protective film on the side of the product with the right hand, and can not tear the protective film on both sides at the same time, reducing the number and area of direct with the silicone sheet to avoid damage to the viscosity and thermal conductivity of the product.
3.Fixed heat sink
Remove the protective film from the other side, apply a certain pressure to the heat sink after installation, and then fix it with screws.1 x Thermal Conductivity Pad