This is a simple and practical solid state relay module, which is very convenient to use, for Arduino, Raspberry Pi, ESP32, PLC or other projects. The GPIO of these controllers are directly connected to this relay input to control the 5 to 30V high current DC power.
Input signal turn-on voltage DC 3 to 32V, turn-off voltage DC 0 to 0.8V. LED indication for relay turn-on.
Output voltage range: DC 5 to 30V. Maximum on-state average current 10 Amp. Maximum on-state current 20 Amp (< 2 second). Non repetitive surge peak on-state current: 160 Amp (<400uS). Maximum on-state resistance 8 milliohms (0.008 ohm).
Fast turn-on and turn-off delay time: Turn-on delay time 5 to 7 uS, Turn-off delay time 60 to 70uS
Photocoupler isolation between input control signal and controlled power, isolation surge voltage up to 5000V.
High quality fireproof nylon material DIN rail mount carrier, can support width 35mm 32mm 15mm rail.
UL CE certified nylon material mount carrier. FR-4 fiberglass material PCB, UL 94-V0 certified PCB. UL CE CQC certified terminal blocks.
20Amp 2x10 Position Barrier Terminal Block Distribution Module for AC DC
SAR 84
OONO 16 Amp 2x12 Position Terminal Block Distribution Module for AC DC
SAR 58
DIN Rail Mount 12 Channel Paddle Switch DC Power Distribution Strip Module
SAR 183
OONO DIN Rail Mount 30A/300V 2x12 Position Screw Terminal Block Distribution Module.
SAR 104
