1. USB Rechargeable: The automatic can be charged through a USB interface, eliminating the need for frequent battery replacement, making it more convenient and worry .
2. Intelligent Induction: The automatic induction uses infrared sensing technology to automatically sense foam spraying, without manual touch, which is more hygienic.
3. Multi Functional Application: The automatic foaming is suitable for various scenarios such as washing phones, hands, and faces, meeting daily needs.
4. High Efficiency and Energy Saving: The automatic accurately controls the amount of foam, reduces waste, and effectively saves foam .
5. Portable Design: The touchless is small and lightweight, portable, and convenient to use anytime, anywhere.

Specification:
Item Type: Touchless
Product Material: ABS, PP
Weight: Approx. 315.00g / 11.11oz
Battery Type: Built in Lithium Battery
Battery Model:
Battery Capacity: 1200mAh
Capacity: 250ml
Height: Approx. 164mm / 6.5in
Top Diameter: Approx. 137mm / 5.4in
Bottom Diameter: Approx. 105mm / 4.1in
Status Indicator:
Power On: Green light on for 0.5 second
Mode 1: Green light on, motor working time is 1.5 seconds, less foam mode
Mode 2: Blue light on, motor working time is 2.5 seconds, more foam mode
Auto : Auto time is 20 seconds
Power Off: Red light on for 0.5 second
Low Battery: Red light on after induction
Charging: LED flashes during charging, LED stays on when charging is complete.
Under power off state, lightly touch the switch button to power on, the green light is on for the first mode (small amount mode); lightly touch the button again, the blue light is on for the second mode (large amount mode); lightly touch it for the third time, the red light is on, power off; in the power off state, press and hold the touch button for 2.5 seconds to enter the auto mode, lightly touch the switch button again to exit the mode and return to the power off state. In the power on state, press and hold for 1 second to power off.

PackageList:
1 x
1 x Bottle
1 x Charging Cable
1 x English User Manual
1 x Adhesive Sticker

Note:
1. The will automatically enter standby mode when not in use, no manual settings required.
2. To prevent accidental triggering of the sensor, if the sensor is blocked for a long time, the red light will flash to prompt for .
3. If automatic cannot clear liquid blockages, multiple attempts with a clearing bottle can solve the blockage issue.
4. For better clearing effect, please use water at 40‑43 degrees Celsius with the clearing bottle.