1. Modular design makes it suitable for use with output modules, remote sensors and transmitters.
2. Light, compact structure, easy to install.
3. Read Claire Intuitive, high reliability, measurement accuracy of ± 1%.
4. High definition screens show an and cumulative .
5. It can be widely used to measure, kerosene,, etc.

Specification:
This digital has a modular design, high , compact size and Durability-Optimized. Internal components that are easy to replace and maintain. Suitable to use with output modules, remote sensors and transmitters.
Features:
The modular design makes it appropriate to use with output modules, remote sensors and transmitters.
Light, compact structure, easy to install.
Read clear intuitive, high reliability, measurement accuracy of ± 1%.
High definition screens show an and cumulative .
It can be widely used to measure, kerosene,, etc.
Specification:
Net size
Color: Blue
Repetition: ± 0.5%
Measure the accuracy: ± 1%
Maximum working press: 20 bar
beach: 10-90 l / min
Single account:
Total accumulated number:
Error coefficient: 0.1000-9.
Unit: L / GAL / PTS / QTS
Working temperature: -10 ° C ~ +60 ° C (14 ° F ~ 140 ° F)
Operating voltage: 2.3- 3.3 V
Application :, Buron, Battery type: 2 pilas AAA LRO3
Weight: 270 g / 9.5 oz (approximately)
List of packaging:
1 x of
Note:
In mind that the new and old type of this product will be sent at random and make sure you don't care about it before ordering.
Dysfunction and solution:
The meter not necessary. 1. El Método de Calibración de Campo no es correct. Calibrate again.
2. The meter is lower at the lowest. Increase the .
3. The meter is blocked by dry liquid. Remove the driver and limit him carefully and make sure he turns freely.
4. The driver is wrapped by the waterproofing material. Remove the counter and make sure the driver turns freely.
5. Too close to the driver. Install correctly.
6. Too close to the engine or the environment with an electronic noise installed correctly.
Reading numbers have faded or disappeared. 1. The battery is exhausted or not connected. Check the batteries or even replace them.
The is normal but the counter cannot count. Press the View button, the counter starts. 1. The Campo no es Correct Campo. Calibrate again.
2. The driver is blocked or damaged. Remove the counter and make sure the driver turns freely.
3. The driver is wrapped by the waterproofing material. Remove the counter and make sure the driver turns freely.
The is low and the counter cannot count. Press the View button, the counter starts. 1. The meter is blocked by dry liquid. Remove the driver, limit him carefully and make sure he turns freely.
2. The meter is lower at the lowest. Increase the .
The counter cannot be calibrated. 1. The circuit plate is damaged. Replace the circuit plate.
2. The button not pressed. Replace the circuit plate.

Package Included:
1 x of