Improve traction on your compatible 2003-2013 Ram 2500 or 2003-2018 Ram 3500 4WD (with 4 inch diameter axle tube) with a BDS Fixed length tubular traction bars. Fabricated from 1.25-inch OD x 1/8-inch wall steel tubing with durometer specific polyurethane bushings on each end. BDS traction bars reduce rear pinion angle change commonly referred to as axle wrap during acceleration with these BDS heavy-duty traction bars. Tubular design for good looks as well as serious axle control.

IMPORTANT:Body Mount modification maybe needed for Crew Cab Long Bed Models. Compatible with 0-8" lift kits, however, if installed on less than 4" of lift the bars will mount facing downward to allow sufficient clearance to the frame during suspension compression.