SizeCar Jump Starter Adapter for Milwaukee 18V MAX
Special Features
Compatible with Milwaukee 18V Batteries This jumper cable is designed exclusively for Milwaukee 18V batteries, enabling quick engine starts even with a fully drained car battery—simply connect your charged for Milwaukee 18V battery to restore power instantly.
New Version Jump Starter Specifications: Cable: Heavy-duty 11 AWG wiring Voltage Compatibility: Designed exclusively for 12V vehicles (not suitable for 24V systems) Vehicle Coverage: Ideal for motorcycles, cars, and SUVs Engine Capacity: Capable of jump-starting diesel engines up to 3.5L
How to Use: 1.Connect Clamps to Car Battery:Attach the red clamp to the positive terminal (+) of the car battery.Attach the black clamp to the negative terminal (-) of the car battery 2.Connect FOR Milwaukee 18V Battery & Pre-charge:Link the jumper cable to your 18V battery.Allow the car battery to charge for approximately 2 minutes before attempting to start. 3.Start the Vehicle:Turn the ignition key or press the start button.Limit cranking time to 2 seconds per attempt.
Safety and Stability Engineered with a pure copper core for enhanced conductivity and integrated active cooling, this jump starter delivers multi-layered circuit protection—including safeguards against short-circuit, over-current, under-voltage, low-load, overheating, over-voltage, over-load, and over-drain scenarios—ensuring operational stability in extreme conditions.
Optimized Version: Friendly Reminder This MIL 20V-to-12V jumper cable functions as a standalone converter device (batteries not included). Detach the charging adapter from the battery when idle to prevent parasitic power drain.