Rubber feet not included (should come with the Jetson K1 board) Includes mount points for a single 2.5inch hard drive on the top of the chassis, but does not include cables or mounting screws (4x ANSI M3x0.5 - 10mm). We recommend using a right-angle SATA cable if you are planning on mounting a 2.5inch hard drive. Included components: Bottom acrylic panel Top acrylic panel 4x .25 inch standoffs (for under the Jetson K1 board) 4x 1.25 inch standoffs (for on top of the Jetson K1 board) 4x .375 inch #4-40 screws (for securing the top panel to the 1.25 inch standoffs)