Search

Search

Home / uxcell / Bearings, Balls & Bushings
uxcell Needle Roller Bearings, One Way Bearing, 8mm Bore 12mm OD 22mm Width 2pcs in Saudi Arabia uxcell Needle Roller Bearings, One Way Bearing, 8mm Bore 12mm OD 22mm Width 2pcs in Saudi Arabia uxcell Needle Roller Bearings, One Way Bearing, 8mm Bore 12mm OD 22mm Width 2pcs in Saudi Arabia uxcell Needle Roller Bearings, One Way Bearing, 8mm Bore 12mm OD 22mm Width 2pcs in Saudi Arabia uxcell Needle Roller Bearings, One Way Bearing, 8mm Bore 12mm OD 22mm Width 2pcs in Saudi Arabia uxcell Needle Roller Bearings, One Way Bearing, 8mm Bore 12mm OD 22mm Width 2pcs in Saudi Arabia uxcell Needle Roller Bearings, One Way Bearing, 8mm Bore 12mm OD 22mm Width 2pcs in Saudi Arabia

uxcell Needle Roller Bearings, One Way Bearing, 8mm Bore 12mm OD 22mm Width 2pcs

SAR 68
Brand
uxcell
Weight
16 g
Number of Items2
– 1 +

Special Features

  • Size: (I.D. (Fw)= 8mm, O.D. (D)= 12mm, Width (C)= 22mm)
  • ST14 steel drawn cup, GCr15 needle rollers one way clutch
  • Good heat tolerance, high load carrying capacity and stiffness
  • Low cross section, enable downsizing and suit for use in restricted mounting spaces
  • Pre-Lubricated. Good running properties

Description

Specification:
Drawn Cup Material: ST14 Steel
Needle Roller Material: Chromium Steel (GCr15)
Bore Diameter (Fw): 8mm
Outside Diameter (D): 12mm
Width: 22mm
Torque: 3.15N*m
Rotating Shaft Limiting Speed: 17000rpm
Rotating Outer Ring Limiting Speed: 12000rpm
Number of Pack: 2 Pcs

Description:
-Drawn Cup Needle Roller Bearing features a deep drawn, thin-walled outer ring. They are compact bearings with high load carrying capacity and stiffness.
-These bearings are especially suitable for high dynamic loads or radial-limited installation. They are mounted with a tight interference fit in the housing.
-Shoulders or snap rings are not required to locate the bearing axially, thus enables a simple and economic design of the housing bore.
-For various applications such as agricultural and construction equipment, pumps and compressors, and two-cycle engines, among others.
-NOTE: Install with press machine or special tools instead of hammers because beating may lead to local deformation.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}