Features:

How to use:
1. First pour the resin or other casting material into a measuring cup and stir slowly to release air bubbles.
2. Add glitter or paint into it as you like.
3. Pour the material into the mould and stir slowly.
4. Wait for 24 hours until the material in the mould is fully solidified.
5. Finally twist the mould and let your craft out completely.

How to clean and store:
After using these silicone moulds, wash them with warm water and then wipe the mould with a soft cloth, the gloss of these moulds can be maintained well.
Store them in a place away from direct sunlight and dust.

Specifications:
Size: as pictures show
Mould material: silicone

Package includes:
2 x Universal lighter protective cover resin mould
1 Set of spice grinder epoxy mould
1 x Square coaster silicone mould

Note:
Please allow slight size error due to manual measurement.
Slight color difference may exist due to different screens.
Don't use a torch and heat drier to release bubbles while resin in the molds, or the heat will break the mold.