Product Name:Jewelry Protective Coating
Capacity:20ml
Instructions for Use:
1. Thoroughly wipe the surface of the jewelry and ensure it is completely dry.
2. Shake the bottle upright for 1–2 minutes to mix the contents evenly (avoid creating bubbles).
3. Use the included brush to apply an appropriate amount of coating, and wipe off any excess liquid on the rim of the container to prevent dripping.
4. Lay the jewelry flat and let it air dry for 15–30 minutes. For stronger protection, apply a second coat after the first layer has completely dried. Wait 24 hours for the coating to fully cure before wearing the jewelry, and avoid contact with water and chemicals during this time.
Precautions:
1. Once the coating wears off, you can reapply it directly without removing the old layer.
2. If the coating accidentally gets on the surface of a gemstone, wipe it off immediately with a soft cloth.
3. Do not use on areas that bend frequently (such as bracelet links), as this may cause the coating to crack.
4. If you have previously used an acidic polishing agent, neutralize the surface with a baking soda solution and wipe it dry first; otherwise, the coating will not adhere properly and may actually accelerate metal corrosion.
5. Apply only a thin layer; a thick application may cause whitening or peeling, which will compromise both appearance and protective effectiveness. Use approximately 1 ounce per 4 square feet to avoid waste.