The SD2IEC feature connects directly to the serial port (IEC) of the commodore 64 or in the back of an existing 1541 (or compatible) disk drive unit. Powered by the User port leaving cartridge slot and cassette port free.

⚡️WARNING: ESD PROTECTION AND ELECTRIC SHOCK HAZARD
Always ground yourself before handling.
Always completely power off and unplug the computer before use.

⚠️AVOID SHORT-CIRCUIT RISK
Short-circuit may damage connected devices or your computer.
Do NOT connect USB cable if it's already connected to User port.
Never install while computer powered on.

⚠️DO NOT DISASSEMBLE
Disassembly voids warranty and may cause safety issues.

⚠️Intellectual Property WARNING
No copyrighted content provided. User responsible for legal use only.

🚫EXEMPT FROM FIRE-RETARDANT REGULATIONS
Due to its low-power, temporary, consumer-grade, and non-construction nature, this product is exempt from CPR, LVD or similar regulations.
Keep away from open flames, high heat sources, and excessive bending/stretching/disassembling.

🚫PROHIBITED FOR IN-WALL, CEILING, UNDER-FLOOR OR FIXED BUILDING INSTALLATION
This product is designed for temporary home or retro device connections.
Strictly prohibited for permanent installation in buildings, in-wall wiring, or any construction use.