Tired of illumination wasting electricity all day or failing in bad weather? Our IP65 photoelectric switch solves both! This robust sensor automatically activates illumination only when needed—saving up to 60% on electricity bills. Its industrial-grade MOV voltage absorber (tested to 6KV) safeguards against electrical strikes, while the auto-reset circuit breaker avoids burnout. Excellent for streets, parking lots, and gardens, it handles extreme cold (-25℃) and heat (+75℃) without flickering. Install in minutes: just connect to 80V-305VAC systems and enjoy automated lighting that's FCC/CE certified for security. Includes 1 switch (8.2x6cm) with 20s interference-blocking delay to avoid false triggers.

Condition: Completely New
Item Type: Photoelectric Switch
Material: PC
Rated Voltage: 120V-277VAC
Voltage Range: 80V-305VAC
Rated Frequency: 50/60Hz
Specified Load: 1000W for Tungsten, 1800VA for Ballast
Electricity Consumption: 120V/0.42W 220V/0.8W
On/Off: 1(FC)/ON 4(FC)/OFF
Interference-Blocking Delay: 20s
High Load Type, Capacity Factor: PF1.0 277VAC 0.96
Insulation Strength: 3000VAC 1mA 1s
Particle-protected and Weatherproof: IP65 (Meets GB4208-2008 IEC60529:2013 standard requirements)
Voltage Tolerance (MOV): 420J/6KV (Meets IEC61000-4-5:2005 standard requirements)
EMI Disturbance Voltage: Meets FCC Part 15 Class B QP maximum and for AV mean standard requirements
Use Environment: Outdoor, minus -25℃ to +75℃
Overload Current Protection: Auto-reset circuit breaker
Relative Humidity: 99%RH
Failure Mode: Fail-ON
Product Size: Approx. 8.2 x 6 cm / 3.2 x 2.4 in
Weight: Approx. 123g / 4.3oz

Package List：
1 x Photoelectric Switch